MORE SMALL PARTS E-SYNC HUB PARTS

Made by Enduro, this #6804 sealed cartridge bearing measures 20x32x7mm and is chrome for added durability. Sold as a pair of two. Replaces Stan's part numbers ZH0818 and ZH0819.

These end caps fit Centerlock E-sync hubs with 135mm or 150mm rear axle spacing. The non-drive side end cap includes a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Compatible with E-sync, Neo,...

This kit includes a pair of end caps to fit a single Centerlock E-sync hub with 142mm, 148mm, or 157mm axle spacing and Shimano Micro Spline freehubs. The non-drive side end cap includes a low-friction U-cup seal that snaps into place and stays secure...

This pair of front end caps is designed to fit 6-bolt E-sync OS hubs when used with 9mm quick-release axles. The included end caps are also compatible with 6-bolt Neo OS hubs. The end caps feature a low-friction U-cup seal that snaps into place...

With 6066 alloy shells and quality Enduro cartridge bearings, E-sync hubs are built to roll smoother longer. Serviceable and rebuildable, with a range of endcap options and spare parts available, the E-sync is ready to quietly perform, year after year. Available in 6-bolt or...

This spacer is positioned between the bearings of front E-sync OS hubs. Not compatible with the most common 15x110mm hub spacing. This spacer is compatible with 20x110mm, 12x100mm, 9x100mm thru-axle, 9x100mm quick-release, and RockShox Torque-Cap 100mm E-sync OS hubs. Not compatible with Centerlock or...

This spacer is positioned between the bearings of rear E-sync hubs. Compatible with 6-bolt E-sync, Neo, and Neo Ultimate 12x135mm, 12x142mm, or quick-release hubs. Not compatible with any 148mm or 157mm hub. Not compatible with Centerlock hubs. Not compatible with M-pulse hubs.

This spacer is positioned between the bearings of front Centerlock E-sync hubs made for 110mm Boost axle spacing. Not compatible with 6-bolt or 100mm (non-Boost) E-sync hubs. Not compatible M-pulse hubs. How To: E-Sync Hub Service Videos

This spacer is positioned between the bearings of front E-sync OS hubs. Compatible with the most common 15x110mm hub spacing. Not compatible with 20x110mm, 12x100mm, 9x100mm thru-axle, 9x100mm quick-release, and RockShox Torque-Cap 100mm E-sync OS hubs. Not compatible with Centerlock or non-OS versions of...

This spacer is positioned between the bearings of front Centerlock E-sync hubs made for 100mm (non-boost) axle spacing. Compatible with 9x100mm and 15x100mm axles. Not compatible with 6-bolt or Boost 110mm E-sync hubs. Not compatible with M-pulse hubs. How To: E-Sync Hub Service Videos

This spacer is positioned between the bearings of front 6-bolt E-sync hubs made for 110mm Boost axle spacing. Not compatible with Centerlock or 100mm (non-Boost) E-sync hubs. Not compatible M-pulse hubs. How To: E-Sync Hub Service Videos

This spacer is positioned between the bearings of front 6-bolt E-sync hubs made for 100mm (non-boost) axle spacing. Compatible with 9x100mm and 15x100mm axles. Not compatible with Centerlock or Boost 110mm E-sync hubs. Not compatible with M-pulse hubs. How To: E-Sync Hub Service Videos

Made by Enduro, this #6805 sealed cartridge bearing measures 25x37x7mm and is chrome for added durability. Sold as a single bearing. Replaces Stan's part numbers ZH1623 and ZH1624.

This spacer is positioned between the bearings of rear E-sync hubs. Compatible with 6-bolt E-sync, Neo, and Neo Ultimate 12x150mm, 12x157mm, and single-speed rear hubs. Not compatible with any 135mm,142mm, or 148mm hub. Not compatible with Centerlock hubs. Not compatible with M-pulse hubs. How...

Through-bolt systems with 9mm axles are uncommon compared to 15mm thru-axle and classic 9mm quick-release systems, but we do offer end caps for this system. This pair of front end caps is designed to fit 6-bolt E-sync OS hubs when used with 9mm thru-axles....

Through-bolt systems with 9mm axles are uncommon compared to 15mm thru-axle and classic 9mm quick-release systems, but we do offer end caps for this system. This pair of front end caps is designed to fit Centerlock E-sync hubs when used with 9mm thru-axles. The...

These end caps fit Centerlock E-sync hubs with rare 10x135mm thru-axle spacing (example: DT RWS), and Shimano HG or SRAM XD/XDR cassettes. The non-drive side end cap includes a low-friction U-cup seal that snaps into place and stays secure even when your wheel is...

This spacer is positioned between the bearings of rear E-sync hubs. Compatible with Centerlock E-sync, Neo, and Neo Ultimate 12x135mm, 12x142mm, or quick-release hubs. Not compatible with any 148mm or 157mm hub. Not compatible with 6-bolt hubs. Not compatible with M-pulse hubs.