MORE SMALL PARTS M-PULSE HUB PARTS

Made by Enduro, this set of two smooth and durable #6903 cartridge bearings is used in M-pulse hub shells. Each bearing measures 17x30x7mm. One kit includes both bearings required.

Made by Enduro, this #3803 cartridge bearing measures 17x26x10mm and features a double row of bearings integrated into a single housing to offer maximum durability and stiffness with minimal resistance. This bearing is used in M-pulse freehubs. This kit includes only one bearing.

This preload ring is used to adjust bearing preload on M-pulse rear hubs. The kit includes both the ring and the pinch bolt. Fits all M-pulse rear hubs. Not compatible with E-sync, Neo, Neo Ultimate, and 3.30 hubs.

This 1.8mm silver spacer allows adjustment for different cassette speeds. It is included with M-pulse Shimano HG and SRAM XDR freehubs. Not compatible with E-sync, Neo, Neo Ultimate, and 3.30 hubs.

This end cap is for 100mm M-Pulse front hubs to be used with forks that use a 15mm diameter axle and 100mm axle width. Only one end cap is required for conversion since your current preload ring is compatible with both 12mm and 15mm...

This hub shell seal is designed specifically to keep dirt and moisture out of M-pulse hubs. It is included with M-pulse freehubs. Fits all M-pulse rear hubs. Not compatible with E-sync, Neo, Neo Ultimate, and 3.30 hubs.

Made by Enduro, this #6802 cartridge bearing measures 15x24x5mm and is used in M-pulse freehubs. This kit includes only one bearing.

This axle allows M-pulse hubs to be used with front forks that require 15mm diameter axles. Fits all M-pulse front hubs. Compatible with both 6-bolt and Centerlock. Not compatible with E-sync, Neo, Neo Ultimate, and 3.30 hubs.

M-pulse freehubs are precision machined and include the hub shell seal, pre-installed pawls with magnets, pawl retainer, freehub shield, 1.8mm cassette spacer, double-row Enduro 3803 17x26x10mm bearing, Enduro 6802 15x24x5mm bearing, and freehub spacer. Compatible only with SRAM XD and XDR cassettes. Fits all...

M-pulse freehubs are precision machined and include the hub shell seal, pre-installed pawls with magnets, pawl retainer, freehub shield, 1.8mm cassette spacer, double-row Enduro 3803 17x26x10mm bearing, Enduro 6802 15x24x5mm bearing, and freehub spacer. Compatible only with Shimano HG cassettes. Fits all M-pulse rear...

M-pulse freehubs are precision machined and include the hub shell seal, pre-installed pawls with magnets, pawl retainer, freehub shield, double-row Enduro 3803 17x26x10mm bearing, Enduro 6802 15x24x5mm bearing, and freehub spacer. Compatible only with Shimano Micro Spline cassettes. Fits all M-pulse rear hubs. Not...

Together with the Preload Ring (sold separately), this preload pinch bolt is used to adjust bearing preload on M-pulse hubs. Kit contains two pinch bolts. Fits all M-pulse hubs. Not compatible with E-sync, Neo, Neo Ultimate, and 3.30 hubs.

This rear axle is designed to work with M-pulse hubs and frames with 12x148mm axle spacing. Fits all 148mm M-pulse rear hubs. Not compatible with E-sync, Neo, Neo Ultimate, and 3.30 hubs.

This preload ring is used to adjust bearing preload on M-pulse front hubs. The kit includes both the ring and the pinch bolt. Fits all M-pulse front hubs. Compatible with both 12mm and 15mm thru-axles. Compatible with both 6-bolt and Centerlock. Not compatible with...

This pawl retainer keeps pawls in place in M-pulse freehubs. Fits all M-pulse rear hubs. Not compatible with E-sync, Neo, Neo Ultimate, and 3.30 hubs.

This end cap is for 110mm M-Pulse front hubs to be used with forks that use a 15mm diameter axle and 110mm axle width. Only one end cap is required for conversion since your current preload ring is compatible with both 12mm and 15mm...

This shielded end cap allow all M-pulse rear hubs to be used with frames with 12x142mm, 12x148mm, and 12x157mm axle spacing. Fits all M-pulse rear hubs. Not compatible with E-sync, Neo, Neo Ultimate, and 3.30 hubs.

This axle allows M-pulse hubs to be used with front forks that require 12mm diameter axles. Fits all M-pulse front hubs. Compatible with both 6-bolt and Centerlock. Not compatible with E-sync, Neo, Neo Ultimate, and 3.30 hubs.

This rear axle is designed to work with M-pulse hubs and frames with 12x157mm axle spacing. Fits all 157mm M-pulse rear hubs. Not compatible with E-sync, Neo, Neo Ultimate, and 3.30 hubs.

This end cap is for 110mm M-Pulse front hubs to be used with forks that use a 12mm diameter axle and 110mm axle width. Only one end cap is required for conversion since your current preload ring is compatible with both 12mm and 15mm...