MORE SMALL PARTS

This pair of front end caps is designed to fit Centerlock E-sync hubs when used with 15mm axles. The included end caps are also compatible with Neo and Neo Ultimate hubs. The end caps feature a low-friction U-cup seal that snaps into place and...

This pair of front end caps is designed to fit 6-bolt E-sync hubs when used with 9mm quick-release axles. The included end caps are also compatible with Neo and Neo Ultimate hubs. The end caps feature a low-friction U-cup seal that snaps into place...

This kit includes end caps and a quick-release skewer, allowing you to convert your thru-axle 6-bolt E-sync, Neo, or Neo Ultimate rear hub to a 10x135mm quick-release system. Compatible with 6-bolt E-sync, Neo, and Neo Ultimate 12x142mm rear hubs. Compatible with frames with traditional,...

This spacer is required for proper freehub positioning and must be installed on the axle prior to installing the freehub. Compatible with all E-sync freehubs. Not compatible with M-pulse, Neo, or Neo Ultimate freehubs, but can be used in conjunction with E-sync freehub as...

This seal is positioned between the freehub and hub shell on all E-sync hubs. It is designed for a precise fit that prevents dirt and other contaminants from entereing the hub so the hub internals keep working smoothly. This seal is compatible with all...

This preload ring is used to adjust bearing preload on M-pulse rear hubs. The kit includes both the ring and the pinch bolt. Fits all M-pulse rear hubs. Not compatible with E-sync, Neo, Neo Ultimate, and 3.30 hubs.

This 1.8mm silver spacer allows adjustment for different cassette speeds. It is included with M-pulse Shimano HG and SRAM XDR freehubs. Not compatible with E-sync, Neo, Neo Ultimate, and 3.30 hubs.

This heavy-duty pawl and spring kit fits all E-sync freehubs. The kit includes four pawls and four pawl springs. This pawl and spring kit is compatible with all E-sync hubs. Not compatible with M-pulse, Neo, or Neo Ultimate freehubs, but can be used in...

This end cap is for 100mm M-Pulse front hubs to be used with forks that use a 15mm diameter axle and 100mm axle width. Only one end cap is required for conversion since your current preload ring is compatible with both 12mm and 15mm...

These end caps fit Centerlock E-sync hubs with 10x135mm quick-release rear axle spacing and Shimano HG or SRAM XD/XDR cassettes. The non-drive side end cap includes a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from...

This hub shell seal is designed specifically to keep dirt and moisture out of M-pulse hubs. It is included with M-pulse freehubs. Fits all M-pulse rear hubs. Not compatible with E-sync, Neo, Neo Ultimate, and 3.30 hubs.

Made by Enduro, this #6802 cartridge bearing measures 15x24x5mm and is used in M-pulse freehubs. This kit includes only one bearing.

This axle allows M-pulse hubs to be used with front forks that require 15mm diameter axles. Fits all M-pulse front hubs. Compatible with both 6-bolt and Centerlock. Not compatible with E-sync, Neo, Neo Ultimate, and 3.30 hubs.

M-pulse freehubs are precision machined and include the hub shell seal, pre-installed pawls with magnets, pawl retainer, freehub shield, 1.8mm cassette spacer, double-row Enduro 3803 17x26x10mm bearing, Enduro 6802 15x24x5mm bearing, and freehub spacer. Compatible only with SRAM XD and XDR cassettes. Fits all...

This pair of front end caps is designed to fit 6-bolt E-sync OS and Neo OS hubs when used with 15mm axles. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from...

This kit allows you to convert your 6-bolt E-sync front hub to a traditional 100mm quick release. The kit includes two end caps and our aluminum quick-release skewer. The end caps feature a low-friction U-cup seal that snaps into place and stays secure even...

Made by Enduro, this #6802 sealed cartridge bearing measures 15x24x5mm and is chrome for added durability. Sold as a single bearing. Replaces Stan's part numbers ZH2228 and ZH2229.

This kit includes end caps, threaded axle, bolts and washers, allowing you to convert your thru-axle or quick release E-sync, Neo, or Neo Ultimate rear hub to a 10x135mm bolt-on system. Bolt-on axles are recommended to prevent slipping and wheel misalignment in frames with...

Looking for a splash of color? The Stan's logo opposite your valve can be customized with our universal decal sheet. Each sheet contains two decals of each color, or enough for a single wheel, and can really bling out your bike. Available in Orange...

This pair of front end caps is designed to fit E-sync hubs when used with RockShox/SRAM-specific Torque-Cap 15mm thru-axle forks. These end caps are also compatible with Neo and Neo Ultimate hubs. The end caps feature a low-friction U-cup seal that snaps into place...